Airbrakes Test Rocket
August 2026 - Present
With the primary goal of IREC being to get as close to a target altitude as possible, the implementation of airbrakes onto a rocket allows for the active control of apogee and thus a much more accurate, repeatable max altitude.
This rocket is designed to travel to approximately 8k feet and reach Mach 0.83, allowing for testing of all potential issues such as transonic speeds affecting altitude measurements that may be faced by a 30k rocket. With the ultimate goal being integration to our IREC rocket, scalability of design is one of the most important factors in the creation of this test rocket.
Airbrake Placement
A major design decision for any airbrake mechanism is its location relative to the rest of the rocket. Using CFD, I was able to determine that locating the flaps behind the fins had the least effect on the dynamic stability of the rocket, ensuring a predictable flight.

Mechanism Design
While many airbrake designs for 10k rockets found in IREC feature leaflets which extrude normal to the rocket's main axis, the higher speeds and larger motors of 30k rockets make such designs unviable.
To address this, I created a cable driven design which allows for actuation of the mechanism in the limited spaced of the boattail while remaining robust and minimizing error through backlash. Further, this design's winch avoids the need for many alignment considerations, reducing the weight of the mechanism by 70.8% when compared to our team's previous attempts at airbrakes.
Below are screenshots of a preliminary design presented at the team's conceptual design review. By integrating many features into existing bulkheads and airframe components, this mechanism will prove much easier to integrate into a cohesive rocket.



